Window Machines Manufacturer

 

Products:

H100
Single head cutting machine

 

Length :	750 mm
Width :	900 mm
Height :	1160 mm
Weight :	205 Kg
Air Pressure :	6-8 Bar
Total Power :	2200 W
Safety :	Safety of employees and machines is the maximum value (CE)
Pvc Profile Cutting :	Yes
Aluminium Profile Cutting :	Yes
Cutting Angle Limits :	-45 ... 0 ... 45 degrees
Making the Cut Capabilities :	Due to the large square with the moving parts can be cut
Cutting time options :	Available, user can adjust.
Counting quantity of cutting :	None
Conveyor :	Normal coveyor
Operating Voltage :	3 Phases , 400 Volt , 50 Hz
Control Unit :	Penomatic
Parameter Selection :	Analoge
Ac Motor :	3 phases , 2 Hp 3000 Rpm
Cooling System :	Lubrication properties of the saw cutting aluminium profiles
Operating System :	. Is used for cutting PVC and Aluminium Profiles . Between 45 and 90 degrees can make the cut . The machine works fully automatic with penumatic systems . Saw cutting speed can be adjusted
Double head using mode :	None
Single Head using mode :	Available
Error notice :	None
HMI :	None
Reset :	Can rest by rest key

 

H105
Full automatic one head cutting machine for pvc and aluminum

Length :	1000 mm
Width :	700 mm
Height :	1850 mm
Weight :	195 Kg
Air Pressure :	6 - 8 Bar
Total Power :	2000 W
Safety :	Safety of employees and machines is the maximum value (CE)
Pvc Profile Cutting :	Yes
Aluminium Profile Cutting :	Yes
Cutting Angle Limits :	-45 ... 0 ... 45 degree
Making the Cut Capabilities :	Due to the large square with the moving parts can be cut
Cutting time options :	Available, user can adjust.
Counting quantity of cutting :	Available
Conveyor :	Digital , Servo conveor up to 6 meters is optional (You can order)
Operating Voltage :	3 F, 380Volt, 50 Hz
Control Unit :	Full Automatic PLC Controled
Parameter Selection :	Touch Panel available , User can set parameter easily
Ac Motor :	3 Faz, 1.5 Hp
Cooling System :	Lubrication properties of the saw cutting aluminium profiles
Operating System :	. Is used for cutting PVC and Aluminium Profiles . Between 45 and 90 degrees can make the cut . The machine works fully automatic with penumatic systems and PLC controled servo Motor . Saw cutting speed can be adjusted
Double head using mode :	None
Single Head using mode :	Available
Error notice :	Available, reasons and solutions.
HMI :	16 colors on touch panel
Reset :	Reset at every begins automatically. Can reset everytime

H110
Double headed Cutting machine for PVC and Aluminum

Length :	5500 MM
Width :	1000 mm
Height :	1900 mm
Weight :	760 Kg
Air Pressure :	6-8 Bar
Total Power :	4500W
Safety :	Safety of employees and machines is the maximum value (CE)
Pvc Profile Cutting :	Yes
Aluminium Profile Cutting :	Yes
Cutting Angle Limits :	0 ... 45 degree
Making the Cut Capabilities :	Due to the large square with the moving parts can be cut
Cutting time options :	Available, user can adjust.
Counting quantity of cutting :	Available
Conveyor :	Normal coveyor
Operating Voltage :	3 F, 380Volt, 50 Hz
Control Unit :	Full automatic PLC control
Ac Motor :	3 Faz, 1.5 Hp
Parameter Selection :	Touch Panel available , User can set parameter easily
Cooling System :	Lubrication properties of the saw cutting aluminium profiles
Operating System :	. Is used for cutting PVC and Aluminium Profiles . Between 45 and 90 degrees can make the cut . The machine works fully automatic with penumatic systems and PLC controled servo Motor . Saw cutting speed can be adjusted
Double head using mode :	available
Single Head using mode :	Available
Error notice :	Available, reasons and solutions.
HMI :	65000 colors on touch panel
Reset :	Reset at every begins automatically. Can reset everytime.

 

H200
Drilling and Copyrouting and water Slot

 

H210

 
H220

H400
Manual End Milling

Length :	500 mm
Width :	750 mm
Height :	1250 mm
Weight :	110 Kg
Air Pressure :	6 - 8 Bar
Total Power :	1200 W
Safety :	Safety of employees and machines is the maximum value (CE)
Milling Process :	Manual
Milling Limits :	45 - 90 degree
Cooling System :
Operating Voltage :	3 F, 400 Volt, 50 Hz
Control Unit :	Electric and Penomatic
Ac Motor :	3 F , 1.5 Hp , 3000 Rpm
Operating System :	.UPVC and Aluminum Can be used .Each sort of profile needs its own blade .Milling Process will do manually

H410
Automatic End Milling

 

Length :	500 mm
Width :	750 mm
Height :	1250 mm
Weight :	105 Kg
Air Pressure :	6 - 8 Bar
Total Power :	1500 W
Safety :	Safety of employees and machines is the maximum value (CE)
Milling Process :	Automatic
Milling Limits :	45 - 90
Operating Voltage :	3 F , 380 Volt , 50 Hz
Control Unit :	Electric and Penomatic
Ac Motor :	3 F , 2 Hp 3000 Rpm
Cooling System :	Optional
Operating System :	.UPVC and Aluminum Can be used .Each sort of profile needs its own blade .Milling Process will do Automaticly

H500
Single Corner welding machine

Length :	700 mm
Safety :	Maxium safety for employees and machine.
Width :	700 mm
Height :	1400 mm
Weight :	185 Kg
Air Pressure :	6 - 8 Bar
Total Power :	2000 W
Welding Size :	Free
Maximum Height of Profile :	140 mm
Maximum Profile Depth :	160 mm
Single Head Mode :	Available
Double Head Mode :	None
Dynamic System :	Penomatic
Parameters Options :	Has desired time and parameter selection. Can work without deviation of temperature control and time.
Welding Limits :	Can weld 15-180 degrees.
Replacement Teflon :	It is easy to change it
Resistance Operating System :	Down to Up
PLATE MOVEMENT :
Operating System :	• Has fully automatic operating system. • Up pistons has press feature one by one. • Can weld small windows last corner which is under construction easily. • Resistance block works up to down, thus there is no over-warming on body of machine • Machine integrate corners of PVC profiles by welding.
Reset :	Can rest by rest key
Operating Voltage :	1 F, 220 Volt, 50 Hz
Control Unit :	Full automatic electronic card control

 

H510
Double headed welding machine

Length :	4000 mm
Width :	800 mm
Height :	1550 mm
Weight :	640 Kg
Air Pressure :	6 - 8 Bar
Total Power :	2000 W
Safety :	Safety of employees and machines is the maximum value (CE)
Maximum Height of Profile :	140 mm
Maximum Profile Depth :	160 mm
Single Head Mode :	Available. Can weld single corner staggered.
Double Head Mode :	Available. Can weld double corner staggered.
Dynamic System :	All movements occur on lineer sleds
Parameters Options :	Has desired time and parameter selection. Can work without deviation of temperature control and time.
Welding Limits :	Can weld between 15-180 degrees.
Welding Size :	410*3350mm
Replacement Teflon :	It is easy to change it.
Resistance Operating System :	Up To Down
PLATE MOVEMENT :	Double
Operating Voltage :	1 F, 220 Volt, 50 Hz
Control Unit :	Has fully automatic electronic card control.
Operating System :	Has fully automatic operation system Can weld small windows last corner which is under construction. Resistance block works up to down, thus there is no over-warming body of machine. Machine integrate corners of PVC profiles by welding. All movements occur on lineer sleds.
Reset :	Can rest by rest key

 

H515
Single Corner welding machine

Length :	830 mm
Width :	750 mm
Height :	1500 mm
Weight :	225 Kg
Air Pressure :	6 - 8 Bar
Total Power :	2000 W
Safety :	Safety of employees and machines is the maximum value (CE)
Parameters Options :	Has desired time and parameter selection. Can work without deviation of temperature control and time.
Single Head Mode :	Available. Can weld single corner staggered.
Double Head Mode :	None
Dynamic System :	All movements occur on lineer sleds
Welding Limits :	Can weld 15-180 degrees.
Replacement Teflon :	It is easy to change it.
Welding Size :	Free
Maximum Height of Profile :	140 mm
Maximum Profile Depth :	160 mm
Resistance Operating System :	Down To Up
PLATE MOVEMENT :	Double
Operating Voltage :	1 F, 220 Volt, 50 Hz
Control Unit :	Has fully automatic electronic card control.
Operating System :	• Has fully automatic operating system. • Can weld small windows last corner which is under construction. • Resistance block works up to down, thus there is no over-warming on body of machine. • Machine integrate corners of PVC profiles by welding. • Melting distance can be adjusted between 0.2mm -1mm . • Has lineer operating system • Has double plate operating system. • Can clean waste of welding (for foil covered profiles) • Up pistons has press feature one by one.
Reset :	Can rest by rest key

 

H600
Corner cleaning



 

Length :	800 mm
Safety :
Width :	1000 mm
Height :	1450 mm
Weight :	300 Kg
Air Pressure :	6 - 8 Bar
Total Power :	2200 W
Operating System :
Reset :
Operating Voltage :	3 F,400 V
Control Unit :	Controlled by digital card
Parameter Selection :
Ac Motor :

H610
Corner cleaning And End milling

Length :	750 mm
Width :	690 mm
Height :	1450 mm
Weight :	120 Kg
Air Pressure :	6 - 8 Bar
Total Power :	1100 W
Safety :	Safety of employees and machines is the maximum value (CE)
Operating Voltage :	3 F , 400 V , 50 Hz
Control Unit :	Electro Penumatic
Ac Motor :	1.5 Hp
Operating System :	. Manual end milling for UPVC & Aluminium Mullion Profile . Cleaner for welded corner of UPVC profile . Working speed is adjustable . working angle is adjustable

 

H700
Glazing Bead Cutting For PVC

Length :	600 mm
Width :	1100 mm
Height :	1100 mm
Weight :	135 Kg
Air Pressure :	6 - 8 Bar
Total Power :	2200 W
Safety :	Safety of employees and machines is the maximum value (CE)
Pvc Profile Cutting :	Yes
Aluminium Profile Cutting :	Optional (you can order)
Cutting Angle Limits :	45 degree
Conveyor :	Normal coveyor
Reset :	Can reset by reset key
Operating Voltage :	3 F , 400 V , 50 Hz
Control Unit :	Electro Penumatic
Ac Motor :	2 X 1.5 Hp 3000 Rpm
Cooling System :	Optional for aluminium profiles
Operating System :	. Cutting angle is 45 . Cuts Automatically . Cutting speed is adjustable . Cutting Blades can be changed easily

Quality Certificates Please Click Here

For More information and Price list for Machines,
Please Do Not Hesitate To Contact Us
Just Fill in The Form Below.